Live Support
+1-800-426-6301Shop By Category
Showing 1 - 12 of 14
-
Standard Features
- Cooling Capacity: 45,000 BTUH / 4 Tons
- Up to 8 hours of continuous operation
- Metering to precisely control refrigerant flow
- Lightweight aluminum outer shell
- Easy to access parts for fast maintenance
- Environmentally safe R-410A refrigerant
- High pressure switch
- Loss of charge/low pressure switch
- Freeze protection switch
- Heavy duty trailer with steel construction
- Wheels lock with towbar in upright position
- 25' long blower hose with storage compartment
- External power source outlet for service tools
- SEER 13.0
- Low oil shutdown protection
Aircraft Applications: -
Standard Features
- 17-7505-7000 (Gasoline), 17-7524-0000 (LPG):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch - 17-7505-7000
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Trailer mounted - Finish: Black
- 20 HP Honda engine - 17-7505-7000
- 23 HP Subaru engine - 17-7524-0000
- 13 gal (49.2 l) tank with run time of 8 hours - 17-7505-7000
- 240/1 phase, 13.5 kW AC output
- Finish: Acrylic Enamel Gray
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7505-7000)
- Units are designed to cool and/or heat an aircraft through a window or door opening
Variants
- 17-7505-7000 - Gas Driven 240V/1ph, 13.5 kW AC output
- Currently Viewing 17A7505-7000 - Gas Driven 240V/1ph, 13.5 kW AC output with Heater
Aircraft Applications: -
Standard Features
- 17-7503-7000 (AC Plug-in):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Trailer mounted - Finish: Black
- Finish: Acrylic Enamel Gray
- AC plug-in: 208, 230, 400, 460, 575 volt
- 1 or 3 phase (single phase not available in all voltages)
- 50 ft (15.3 m) long power cord
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7503-7000)
- Unit is designed to cool and/or heat an aircraft through a window or door opening
Variants
- 17-7503B7000 - 208V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503C7000 - 230V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503F7000 - 208V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503G7000 - 230V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503J7000 - 460V/60Hz/3ph, 13.8 AMPS - No Heater
- 17A7503B7000 - 208V/60Hz/1ph, 50.4 AMPS w/Heater
- 17A7503C7000 - 230V/60Hz/1ph, 56.4 AMPS w/ Heater
- 17A7503F7000 - 208V/60Hz/3ph, 48.2 AMPS w/ Heater
- 17A7503G7000 - 230V/60Hz/3ph, 54.6 AMPS w/ Heater
- Currently Viewing 17A7503J7000 - 460V/60Hz/3ph, 24.3 AMPS w/ Heater
Aircraft Applications: -
Standard Features
- 17-7503-7000 (AC Plug-in):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Trailer mounted - Finish: Black
- Finish: Acrylic Enamel Gray
- AC plug-in: 208, 230, 400, 460, 575 volt
- 1 or 3 phase (single phase not available in all voltages)
- 50 ft (15.3 m) long power cord
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7503-7000)
- Unit is designed to cool and/or heat an aircraft through a window or door opening
Variants
- 17-7503B7000 - 208V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503C7000 - 230V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503F7000 - 208V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503G7000 - 230V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503J7000 - 460V/60Hz/3ph, 13.8 AMPS - No Heater
- 17A7503B7000 - 208V/60Hz/1ph, 50.4 AMPS w/Heater
- 17A7503C7000 - 230V/60Hz/1ph, 56.4 AMPS w/ Heater
- 17A7503F7000 - 208V/60Hz/3ph, 48.2 AMPS w/ Heater
- Currently Viewing 17A7503G7000 - 230V/60Hz/3ph, 54.6 AMPS w/ Heater
- 17A7503J7000 - 460V/60Hz/3ph, 24.3 AMPS w/ Heater
Aircraft Applications: -
Standard Features
- 17-7503-7000 (AC Plug-in):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Trailer mounted - Finish: Black
- Finish: Acrylic Enamel Gray
- AC plug-in: 208, 230, 400, 460, 575 volt
- 1 or 3 phase (single phase not available in all voltages)
- 50 ft (15.3 m) long power cord
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7503-7000)
- Unit is designed to cool and/or heat an aircraft through a window or door opening
Variants
- 17-7503B7000 - 208V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503C7000 - 230V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503F7000 - 208V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503G7000 - 230V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503J7000 - 460V/60Hz/3ph, 13.8 AMPS - No Heater
- 17A7503B7000 - 208V/60Hz/1ph, 50.4 AMPS w/Heater
- 17A7503C7000 - 230V/60Hz/1ph, 56.4 AMPS w/ Heater
- Currently Viewing 17A7503F7000 - 208V/60Hz/3ph, 48.2 AMPS w/ Heater
- 17A7503G7000 - 230V/60Hz/3ph, 54.6 AMPS w/ Heater
- 17A7503J7000 - 460V/60Hz/3ph, 24.3 AMPS w/ Heater
Aircraft Applications: -
Standard Features
- 17-7503-7000 (AC Plug-in):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Trailer mounted - Finish: Black
- Finish: Acrylic Enamel Gray
- AC plug-in: 208, 230, 400, 460, 575 volt
- 1 or 3 phase (single phase not available in all voltages)
- 50 ft (15.3 m) long power cord
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7503-7000)
- Unit is designed to cool and/or heat an aircraft through a window or door opening
Variants
- 17-7503B7000 - 208V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503C7000 - 230V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503F7000 - 208V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503G7000 - 230V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503J7000 - 460V/60Hz/3ph, 13.8 AMPS - No Heater
- 17A7503B7000 - 208V/60Hz/1ph, 50.4 AMPS w/Heater
- Currently Viewing 17A7503C7000 - 230V/60Hz/1ph, 56.4 AMPS w/ Heater
- 17A7503F7000 - 208V/60Hz/3ph, 48.2 AMPS w/ Heater
- 17A7503G7000 - 230V/60Hz/3ph, 54.6 AMPS w/ Heater
- 17A7503J7000 - 460V/60Hz/3ph, 24.3 AMPS w/ Heater
Aircraft Applications: -
Looking For Custom Parts?
Contact Us -
Standard Features
- 17-7503-7000 (AC Plug-in):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Trailer mounted - Finish: Black
- Finish: Acrylic Enamel Gray
- AC plug-in: 208, 230, 400, 460, 575 volt
- 1 or 3 phase (single phase not available in all voltages)
- 50 ft (15.3 m) long power cord
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7503-7000)
- Unit is designed to cool and/or heat an aircraft through a window or door opening
Variants
- 17-7503B7000 - 208V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503C7000 - 230V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503F7000 - 208V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503G7000 - 230V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503J7000 - 460V/60Hz/3ph, 13.8 AMPS - No Heater
- Currently Viewing 17A7503B7000 - 208V/60Hz/1ph, 50.4 AMPS w/Heater
- 17A7503C7000 - 230V/60Hz/1ph, 56.4 AMPS w/ Heater
- 17A7503F7000 - 208V/60Hz/3ph, 48.2 AMPS w/ Heater
- 17A7503G7000 - 230V/60Hz/3ph, 54.6 AMPS w/ Heater
- 17A7503J7000 - 460V/60Hz/3ph, 24.3 AMPS w/ Heater
Aircraft Applications: -
Standard Features
- 17-7505-7000 (Gasoline), 17-7524-0000 (LPG):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch - 17-7505-7000
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Trailer mounted - Finish: Black
- 20 HP Honda engine - 17-7505-7000
- 23 HP Subaru engine - 17-7524-0000
- 13 gal (49.2 l) tank with run time of 8 hours - 17-7505-7000
- 240/1 phase, 13.5 kW AC output
- Finish: Acrylic Enamel Gray
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7505-7000)
- Units are designed to cool and/or heat an aircraft through a window or door opening
Aircraft Applications: -
Standard Features
- 17-7505-7000 (Gasoline), 17-7524-0000 (LPG):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch - 17-7505-7000
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Trailer mounted - Finish: Black
- 20 HP Honda engine - 17-7505-7000
- 23 HP Subaru engine - 17-7524-0000
- 13 gal (49.2 l) tank with run time of 8 hours - 17-7505-7000
- 240/1 phase, 13.5 kW AC output
- Finish: Acrylic Enamel Gray
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7505-7000)
- Units are designed to cool and/or heat an aircraft through a window or door opening
Variants
- Currently Viewing 17-7505-7000 - Gas Driven 240V/1ph, 13.5 kW AC output
- 17A7505-7000 - Gas Driven 240V/1ph, 13.5 kW AC output with Heater
Aircraft Applications: -
Standard Features
- 17-7503-7000 (AC Plug-in):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Trailer mounted - Finish: Black
- Finish: Acrylic Enamel Gray
- AC plug-in: 208, 230, 400, 460, 575 volt
- 1 or 3 phase (single phase not available in all voltages)
- 50 ft (15.3 m) long power cord
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7503-7000)
- Unit is designed to cool and/or heat an aircraft through a window or door opening
Variants
- 17-7503B7000 - 208V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503C7000 - 230V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503F7000 - 208V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503G7000 - 230V/60Hz/3ph, 25.9 AMPS - No Heater
- Currently Viewing 17-7503J7000 - 460V/60Hz/3ph, 13.8 AMPS - No Heater
- 17A7503B7000 - 208V/60Hz/1ph, 50.4 AMPS w/Heater
- 17A7503C7000 - 230V/60Hz/1ph, 56.4 AMPS w/ Heater
- 17A7503F7000 - 208V/60Hz/3ph, 48.2 AMPS w/ Heater
- 17A7503G7000 - 230V/60Hz/3ph, 54.6 AMPS w/ Heater
- 17A7503J7000 - 460V/60Hz/3ph, 24.3 AMPS w/ Heater
Aircraft Applications: -
Standard Features
- 17-7503-7000 (AC Plug-in):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Trailer mounted - Finish: Black
- Finish: Acrylic Enamel Gray
- AC plug-in: 208, 230, 400, 460, 575 volt
- 1 or 3 phase (single phase not available in all voltages)
- 50 ft (15.3 m) long power cord
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7503-7000)
- Unit is designed to cool and/or heat an aircraft through a window or door opening
Variants
- 17-7503B7000 - 208V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503C7000 - 230V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503F7000 - 208V/60Hz/3ph, 25.9 AMPS - No Heater
- Currently Viewing 17-7503G7000 - 230V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503J7000 - 460V/60Hz/3ph, 13.8 AMPS - No Heater
- 17A7503B7000 - 208V/60Hz/1ph, 50.4 AMPS w/Heater
- 17A7503C7000 - 230V/60Hz/1ph, 56.4 AMPS w/ Heater
- 17A7503F7000 - 208V/60Hz/3ph, 48.2 AMPS w/ Heater
- 17A7503G7000 - 230V/60Hz/3ph, 54.6 AMPS w/ Heater
- 17A7503J7000 - 460V/60Hz/3ph, 24.3 AMPS w/ Heater
Aircraft Applications: -
Standard Features
- 17-7503-7000 (AC Plug-in):
- Cooling capacity 45,000 Btu/hr output
- 1600 cfm maximum air flow
- Refrigerant type R-410A is environmentally safe
- Hermetic compressor belt driven with over current and over temperature protection
- 1,200-2,000 cfm propellor type condenser fan
- 12 in (30 cm) diameter, 25 ft (7.6 m) long output hose
- Dual suction high density filters
- 115 volt (ground fault interrupt) external AC utility outlet with 15 amp fuse and switch
- Sturdy welded frame with 16 gauge sheet metal cabinet
- Trailer mounted - Finish: Black
- Finish: Acrylic Enamel Gray
- AC plug-in: 208, 230, 400, 460, 575 volt
- 1 or 3 phase (single phase not available in all voltages)
- 50 ft (15.3 m) long power cord
- Noncorrosive, sloped condensation drain pan, meets ASHRAE 62-89 (IAQ) standard
- Available Option, 8.7 kW heater, 29,700 Btu/hr maximum thematically controlled (Btu output will vary with input voltage) insert an "A" as the third digit of the model number (e.g. 17A7503-7000)
- Unit is designed to cool and/or heat an aircraft through a window or door opening
Variants
- 17-7503B7000 - 208V/60Hz/1ph, 41.2 AMPS - No Heater
- 17-7503C7000 - 230V/60Hz/1ph, 41.2 AMPS - No Heater
- Currently Viewing 17-7503F7000 - 208V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503G7000 - 230V/60Hz/3ph, 25.9 AMPS - No Heater
- 17-7503J7000 - 460V/60Hz/3ph, 13.8 AMPS - No Heater
- 17A7503B7000 - 208V/60Hz/1ph, 50.4 AMPS w/Heater
- 17A7503C7000 - 230V/60Hz/1ph, 56.4 AMPS w/ Heater
- 17A7503F7000 - 208V/60Hz/3ph, 48.2 AMPS w/ Heater
- 17A7503G7000 - 230V/60Hz/3ph, 54.6 AMPS w/ Heater
Aircraft Applications:
Looking for Additional Support?
Contact UsStrong Cooling Power for Every Operation
Tronair's aircraft air conditioning systems are built for strength, consistency, and convenience in demanding aviation environments. Each ground air conditioning unit features durable construction and precise temperature control to support year-round operations.
Key features include:
- Cooling capacity up to 45,000 Btu/hr and airflow approaching 1,600 CFM
- Electric, gas, or diesel LPG configurations adaptable to available infrastructure
- Optional 8.7 kW heater for cold-weather flexibility
- Compatible with R-410A refrigerant for efficient, environmentally safer performance
- Noncorrosive housings and sloped condensate drains for extended service life
- Integrated safety systems protecting against overcurrent and overtemperature conditions
These qualities make Tronair air conditioning units trusted by FBOs, MROs, and flight departments around the world.
Choosing the Right Aircraft Air Conditioner
Selecting the ideal aircraft air conditioning setup depends on your environment, power availability, and aircraft type. Tronair offers a range of models designed to meet varying operational demands, from compact electric systems for regional aircraft to high-output LPG and gas units suited for large jets.
Matching Unit Size to Aircraft Needs
Cooling capacity and airflow requirements vary across fleet sizes. Tronair models offer outputs near 45,000 Btu/hr, making them suitable for most light and midsize aircraft. For larger airframes, multi-unit configurations can provide broader coverage and faster temperature recovery.
Considering Operating Conditions
Ramp environments differ, and Tronair's options help you adapt. Electric units are ideal for hangar or gate use, while LPG and gas-driven systems provide flexibility for remote or temporary locations. Each unit maintains steady cooling performance regardless of ambient temperature.
Long-Term Maintenance and Serviceability
Each ground air conditioning unit is designed for easy upkeep, featuring accessible components, standardized fittings, and corrosion-resistant materials. Tronair also offers factory support, spare parts, and documentation to simplify ongoing maintenance.